wiki v1

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== FirewallD =====
Listando as zonas existentes
<file bash>
# firewall-cmd --get-zones
block dmz drop external home internal public trusted work
</file>

Listando a zona padrão
<file bash>
# firewall-cmd --get-default-zone
public
</file>

Verificando que interface está atrelada à zona
<file bash>
# firewall-cmd --get-active-zones
public
  interfaces: enp0s3 enp0s8 enp0s9
</file>

Alterando a zona padrão
<file bash>
# firewall-cmd --set-default-zone=internal
success
</file>

Verificando em que zona uma interface está atrelada
<file bash>
# firewall-cmd --get-zone-of-interface=enp0s3
internal
</file>

Tipos de ICMP suportados pelo firewalld
<file bash>
# firewall-cmd --get-icmptypes
destination-unreachable echo-reply echo-request parameter-problem redirect router-advertisement router-solicitation source-quench time-exceeded
</file>

Atribuindo uma interface a uma zona
<file bash>
# firewall-cmd --zone=external --change-interface=enp0s8
success
</file>

<file bash>
# nmcli con mod enp0s8 connection.zone exeternal
# nmcli con up enp0s8
Conexão ativada com sucesso (caminho ativo D-Bus: /org/freedesktop/NetworkManager/ActiveConnection/3)
</file>

<file bash>
# firewall-cmd --reload
success

# firewall-cmd --zone=external --list-all
external (active)
  interfaces: enp0s8
  sources: 
  services: ssh
  ports: 
  masquerade: yes
  forward-ports: 
  icmp-blocks: 
  rich rules: 
</file>

Liberando uma sub-rede na zona internal
<file bash>
# firewall-cmd --zone=internal --add-source=192.0.2.0/24
success
</file>

Listando os serviços suportados
<file bash>
# firewall-cmd --get-services
RH-Satellite-6 amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns freeipa-ldap freeipa-ldaps freeipa-replication ftp high-availability http https imaps ipp ipp-client ipsec iscsi-target kerberos kpasswd ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind rsyncd samba samba-client smtp ssh telnet tftp tftp-client transmission-client vdsm vnc-server wbem-https
</file>

Liberando o service http
<file bash>
# firewall-cmd --add-service=http
success
</file>

<file bash>
# firewall-cmd --zone=internal --list-services
dhcpv6-client http ipp-client mdns samba-client ssh
</file>

Liberando uma 7789
<file bash>
# firewall-cmd --add-port=7789/tcp
success
</file>

<file bash>
# firewall-cmd --list-ports
7789/tcp
</file>

Liberando um serviço a uma sub-rede
<file bash>
# firewall-cmd --add-rich-rule 'rule family="ipv4" source address="192.0.2.0/24" service name="http" accept' 
success
</file>

Liberando uma porta a uma sub-rede
<file bash>
# firewall-cmd --add-rich-rule="rule family="ipv4" source address="192.0.2.0/24" port protocol="tcp" port="7789" accept"
success
</file>

===== Help =====
<file bash>
# firewall-cmd --help

Usage: firewall-cmd [OPTIONS...]

General Options
  -h, --help           Prints a short help text and exists
  -V, --version        Print the version string of firewalld
  -q, --quiet          Do not print status messages

Status Options
  --state              Return and print firewalld state
  --reload             Reload firewall and keep state information
  --complete-reload    Reload firewall and loose state information
  --runtime-to-permanent
                       Create permanent from runtime configuration

Permanent Options
  --permanent          Set an option permanently
                       Usable for options maked with [P]

Zone Options
  --get-default-zone   Print default zone for connections and interfaces
  --set-default-zone=<zone>
                       Set default zone
  --get-active-zones   Print currently active zones
  --get-zones          Print predefined zones [P]
  --get-services       Print predefined services [P]
  --get-icmptypes      Print predefined icmptypes [P]
  --get-zone-of-interface=<interface>
                       Print name of the zone the interface is bound to [P]
  --get-zone-of-source=<source>[/<mask>]
                       Print name of the zone the source[/mask] is bound to [P]
  --list-all-zones     List everything added for or enabled in all zones [P]
  --new-zone=<zone>    Add a new zone [P only]
  --delete-zone=<zone> Delete an existing zone [P only]
  --zone=<zone>        Use this zone to set or query options, else default zone
                       Usable for options maked with [Z]
  --get-target         Get the zone target [P only] [Z]
  --set-target=<target>
                       Set the zone target [P only] [Z]

IcmpType Options
  --new-icmptype=<icmptype>
                       Add a new icmptype [P only]
  --delete-icmptype=<icmptype>
                       Delete and existing icmptype [P only]

Service Options
  --new-service=<service>
                       Add a new service [P only]
  --delete-service=<service>
                       Delete and existing service [P only]

Options to Adapt and Query Zones
  --list-all           List everything added for or enabled in a zone [P] [Z]
  --list-services      List services added for a zone [P] [Z]
  --timeout=<timeval>  Enable an option for timeval time, where timeval is
                       a number followed by one of letters 's' or 'm' or 'h'
                       Usable for options maked with [T]
  --add-service=<service>
                       Add a service for a zone [P] [Z] [T]
  --remove-service=<service>
                       Remove a service from a zone [P] [Z]
  --query-service=<service>
                       Return whether service has been added for a zone [P] [Z]
  --list-ports         List ports added for a zone [P] [Z]
  --add-port=<portid>[-<portid>]/<protocol>
                       Add the port for a zone [P] [Z] [T]
  --remove-port=<portid>[-<portid>]/<protocol>
                       Remove the port from a zone [P] [Z]
  --query-port=<portid>[-<portid>]/<protocol>
                       Return whether the port has been added for zone [P] [Z]
  --list-icmp-blocks   List Internet ICMP type blocks added for a zone [P] [Z]
  --add-icmp-block=<icmptype>
                       Add an ICMP block for a zone [P] [Z] [T]
  --remove-icmp-block=<icmptype>
                       Remove the ICMP block from a zone [P] [Z]
  --query-icmp-block=<icmptype>
                       Return whether an ICMP block has been added for a zone
                       [P] [Z]
  --list-forward-ports List IPv4 forward ports added for a zone [P] [Z]
  --add-forward-port=port=<portid>[-<portid>]:proto=<protocol>[:toport=<portid>[-<portid>]][:toaddr=<address>[/<mask>]]
                       Add the IPv4 forward port for a zone [P] [Z] [T]
  --remove-forward-port=port=<portid>[-<portid>]:proto=<protocol>[:toport=<portid>[-<portid>]][:toaddr=<address>[/<mask>]]
                       Remove the IPv4 forward port from a zone [P] [Z]


  --query-forward-port=port=<portid>[-<portid>]:proto=<protocol>[:toport=<portid>[-<portid>]][:toaddr=<address>[/<mask>]]
                       Return whether the IPv4 forward port has been added for
                       a zone [P] [Z]
  --add-masquerade     Enable IPv4 masquerade for a zone [P] [Z] [T]
  --remove-masquerade  Disable IPv4 masquerade for a zone [P] [Z]
  --query-masquerade   Return whether IPv4 masquerading has been enabled for a
                       zone [P] [Z]
  --list-rich-rules    List rich language rules added for a zone [P] [Z]
  --add-rich-rule=<rule>
                       Add rich language rule 'rule' for a zone [P] [Z] [T]
  --remove-rich-rule=<rule>
                       Remove rich language rule 'rule' from a zone [P] [Z]
  --query-rich-rule=<rule>
                       Return whether a rich language rule 'rule' has been
                       added for a zone [P] [Z]

Options to Handle Bindings of Interfaces
  --list-interfaces    List interfaces that are bound to a zone [P] [Z]
  --add-interface=<interface>
                       Bind the <interface> to a zone [P] [Z]
  --change-interface=<interface>
                       Change zone the <interface> is bound to [Z]
  --query-interface=<interface>
                       Query whether <interface> is bound to a zone [P] [Z]
  --remove-interface=<interface>
                       Remove binding of <interface> from a zone [P] [Z]

Options to Handle Bindings of Sources
  --list-sources       List sources that are bound to a zone [P] [Z]
  --add-source=<source>[/<mask>]
                       Bind <source>[/<mask>] to a zone [P] [Z]
  --change-source=<source>[/<mask>]
                       Change zone the <source>[/<mask>] is bound to [Z]
  --query-source=<source>[/<mask>]
                       Query whether <source>[/<mask>] is bound to a zone
                       [P] [Z]
  --remove-source=<source>[/<mask>]
                       Remove binding of <source>[/<mask>] from a zone [P] [Z]

Direct Options
  --direct             First option for all direct options
  --get-all-chains
                       Get all chains [P]
  --get-chains {ipv4|ipv6|eb} <table>
                       Get all chains added to the table [P]
  --add-chain {ipv4|ipv6|eb} <table> <chain>
                       Add a new chain to the table [P]
  --remove-chain {ipv4|ipv6|eb} <table> <chain>
                       Remove the chain from the table [P]
  --query-chain {ipv4|ipv6|eb} <table> <chain>
                       Return whether the chain has been added to the table [P]
  --get-all-rules
                       Get all rules [P]
  --get-rules {ipv4|ipv6|eb} <table> <chain>
                       Get all rules added to chain in table [P]
  --add-rule {ipv4|ipv6|eb} <table> <chain> <priority> <arg>...
                       Add rule to chain in table [P]
  --remove-rule {ipv4|ipv6|eb} <table> <chain> <priority> <arg>...
                       Remove rule with priority from chain in table [P]
  --remove-rules {ipv4|ipv6|eb} <table> <chain>
                       Remove rules from chain in table [P]
  --query-rule {ipv4|ipv6|eb} <table> <chain> <priority> <arg>...
                       Return whether a rule with priority has been added to
                       chain in table [P]
  --passthrough {ipv4|ipv6|eb} <arg>...
                       Pass a command through (untracked by firewalld)
  --get-all-passthroughs
                       Get all tracked passthrough rules [P]
  --get-passthroughs {ipv4|ipv6|eb} <arg>...
                       Get tracked passthrough rules [P]
  --add-passthrough {ipv4|ipv6|eb} <arg>...
                       Add a new tracked passthrough rule [P]
  --remove-passthrough {ipv4|ipv6|eb} <arg>...
                       Remove a tracked passthrough rule [P]
  --query-passthrough {ipv4|ipv6|eb} <arg>...
                       Return whether the tracked passthrough rule has been
                       added [P]

Lockdown Options
  --lockdown-on        Enable lockdown.
  --lockdown-off       Disable lockdown.
  --query-lockdown     Query whether lockdown is enabled

Lockdown Whitelist Options
  --list-lockdown-whitelist-commands
                       List all command lines that are on the whitelist [P]
  --add-lockdown-whitelist-command=<command>
                       Add the command to the whitelist [P]
  --remove-lockdown-whitelist-command=<command>
                       Remove the command from the whitelist [P]
  --query-lockdown-whitelist-command=<command>
                       Query whether the command is on the whitelist [P]
  --list-lockdown-whitelist-contexts
                       List all contexts that are on the whitelist [P]
  --add-lockdown-whitelist-context=<context>
                       Add the context context to the whitelist [P]
  --remove-lockdown-whitelist-context=<context>
                       Remove the context from the whitelist [P]
  --query-lockdown-whitelist-context=<context>
                       Query whether the context is on the whitelist [P]
  --list-lockdown-whitelist-uids
                       List all user ids that are on the whitelist [P]
  --add-lockdown-whitelist-uid=<uid>
                       Add the user id uid to the whitelist [P]
  --remove-lockdown-whitelist-uid=<uid>
                       Remove the user id uid from the whitelist [P]
  --query-lockdown-whitelist-uid=<uid>
                       Query whether the user id uid is on the whitelist [P]
  --list-lockdown-whitelist-users
                       List all user names that are on the whitelist [P]
  --add-lockdown-whitelist-user=<user>
                       Add the user name user to the whitelist [P]
  --remove-lockdown-whitelist-user=<user>
                       Remove the user name user from the whitelist [P]
  --query-lockdown-whitelist-user=<user>
                       Query whether the user name user is on the whitelist [P]

Panic Options
  --panic-on           Enable panic mode
  --panic-off          Disable panic mode
  --query-panic        Query whether panic mode is enabled
</file>

==== Referências ====

  - [[https://fedoraproject.org/wiki/Features/FirewalldRichLanguage]]
  - [[http://www.tecmint.com/configure-firewalld-in-centos-7/]]
  - [[https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Security_Guide/sec-Using_Firewalls.html]]
  - [[https://fedoraproject.org/wiki/FirewallD]]